Wrap-On #14020 Roof & Gutter De-Icing Cable 20 ft 100 Watts

Description

Some of the boxes are in bad shape but item is new and clips are in sealed bags.
This pre-assembled cable has been designed for the sole purpose of preventing the formation of ice dams on pitched roofs with non-combustible tab shingles and in metal or plastic gutters and downspouts. (Not for use on metal roofs because of the risk of overheating, use self-regulating cable instead such as
EasyHeat PSR
, or the
Danfoss RX
).
It provides drainage channels so that as natural thawing occurs, water has a path to flow off the roof and through the gutters and downspouts. This cable is not for use on a flat roof nor is it intended to clear the roof of snow and ice. The installation of this product is simple and it can be used with either metal or plastic gutters. Read and follow all instructions and pay particular attention to the following points: Install the cable when the outside temperature is above 50˚F because at lower temperatures shingle material may be brittle; Clear all leaves, pine needles and debris from the roof, gutters and downspouts before operating the cable. Do not plug the cable in unless it has been completely uncoiled or it will be damaged.
Each package contains one ready-to-install cable, shingle clips, cable spacers and complete installation instructions. You will also need a tape measure, marker, gloves, ladder and a weatherproof GFCI outlet with control switch.
Roof & Gutter Cables prevent water damage caused by snow and ice buildup.
The Roof and Gutter cables work in conjunction with natural sunlight and a building's own heat dissipation. When natural thawing occurs, the cables create a channel that allows water to flow off the roof and through gutters and downspouts. Easy to operate, they simply plug in for years of trouble-free operation.
Wrap-On Roof and Gutter Cables are the ideal preventative maintenance for snow and ice buildup. They create channels on the roof, in the gutter and in the downspout that allow melting ice and snow to flow freely, eliminating ice dams and reducing icicle formation. They can be used safely on all metal, plastic and vinyl gutters and downspouts and are UL listed and CSA certified.
Even in below freezing weather, snow on the roof will often thaw because of heat from the sun and heat loss from the house through the roof. As this melted snow reaches the roof overhang it refreezes.  Here there is no heat loss so the roof surface is much colder. As this melted snow refreezes again and again on the roof overhang, an ice dam is formed. Soon water backs up under shingles, and leaks into the house.
It's not those big icicles that do the real damage, it's the ice you don't see that backs up in gutters and under shingles. When the ice melts it can really do a number on repair costs.
R
oof de-icing cable prevents this water and ice damage by providing a clear path for melting water to flow off the roof.
It keeps roof edges, gutters and downspouts ice-free.  Versatile design adapts to most roof and gutter configurations.
This product is intended for the sole use of preventing ice dams from forming on inclined roofs with tab shingles, in gutters and downspouts. This roof de-icing cable is not intended for use as a snow melting system to clear roof of ice and snow.
Easy to install
Approved for metal and plastic gutters
Complete with clips and spacers
Each kit includes the Electric Roof De-icing Cable (Residential Grade, 120 Volt, 5 Watts/foot) and 6 foot power cord with plug and enough roof clips and downspout clip
cable spacers to complete the installation.