-40%
TONE MONSTER SBK-3D Bass Guitar Preamp Balance Volume Treble Middle Bass 4 Pots
$ 30.61
- Description
- Size Guide
Description
BUILD ATONE
MONSTER!
SBK-3D
Balance~Volume~Treble/Bass~Middle
If you've been looking for the punch, power and tones available with an active preamp the
TONE
MONSTER
SBK Series
has a model ready to install in your new build or existing instrument. Manufactured in South Korea, they feature an advanced
Surface Mount Technology (SMT)
design minimizing the cavity space required along with top quality components
and meticulous soldering ensures noise free performance
for a
superior tone to dollar value!
With 8 configurations (3-5 potentiometers) to choose from and a +/- 12dB range for either
2 (treble/bass) or 3 (treble/middle/bass) bands of equalization they will make your passive pickups sing
!
Pre wired and ready to install, other features include a frequency shift or Hi/Lo mids toggle switch option (SBK-3A/AD), a
NO SOLDER
terminal block for pickup connection
(neck~shared ground~bridge)
and brass shaft potentiometers for smoother control and longer life.
Installation is typically a breeze - connect your pickups
and solder the bridge ground to the back of the volume potentiometer. For single pickup or pickup selector switch applications simply remove the balance potentiometer and wire direct.
The
SBK Series
circuit board is only 25D X 30W mm so it takes up minimal cavity space however since a potentiometer is mounted on the circuit board a
minimum cavity depth of 1 ¼” (32mm) is required
.
The
SBK-A
models reduce the number of potentiometers by combining functions with a concentric or "stacked" potentiometers.
Powered by a 9V alkaline battery (not included) the circuit can handle up to 18V (2-9V in series) for increased headroom. We offer DIY power upgrades including the
BAT-1
(18V) or
BAT-2
(9 or 18V switchable). Also available is the DIY
PAT-1
, passive/active toggle switch, which functions as a bypass and allows for volume control in the passive mode.
We suggest using pickups with similar outputs, either magnetic or piezoelectric, but not both together since the balance (blend) function is passive. Also, our preamps were designed for use and work best with passive pickups.
FEATURES:
Manufactured in South Korea
Pre wired harness ready to install
Brass shaft potentiometers for smoother control and longer life
Center detent on balance and tone potentiometers
+/-12dB range for 2 or 3 bands of equalization
Configurations from 3 to 5 potentiometers
Frequency shift and Hi/Lo mids toggle switch options
Balance potentiometer with a
NO SOLDER
terminal block
DIY upgrades available for power (18V) and passive/active volume
Treble: +/-12 dB at 4 kHz
Middle: +/- 12dB at 800 Hz
Frequency Shift or Hi/Lo Toggle: +/- 2dB at 2kHz (SBK-3A/3AD)
Bass: +/-12 dB at 60 Hz
Balance: MN500K w/center detent
Input Impedance: 1Mohm
Current: 0.16 mA
Voltage range: 6 ~ 22 volt
Battery Requirement: 9V alkaline
(battery life 1000+ hours)
KNOBS ARE NOT INCLUDED!
Standard Potentiometers: 6mm
Concentric (stacked) Potentiometers: 6mm top / 8mm bottom
SBK Models
SBK-2
(4 pots) Balance~Volume~Treble~Bass
SBK-2D
(3 pots) Balance ~ Volume Treble/Bass
SBK-3
(5 pots) Balance~Volume~Treble~Middle~Bass
SBK-3D
(4 pots) Balance~Volume~Treble/Bass~Middle
SBK-3A
(5 pots) Balance-Volume~Treble~Middle/Frequency Shift~Bass
SBK-3A-DT
(5 pots + toggle) Balance~Volume~Treble~Bass~Middle~Hi/Lo
SBK-3AD
(4 pots) Balance~Volume~Treble/Bass~Middle/Frequency Shift
SBK-3AD-DT
(4 pots + toggle) Balance~Volume~Treble/Bass~Middle~Hi/Lo
-------------------------------------------------------------------
Please note the following:
The seller reserves the right to cancel any and/or all bids at their discretion.
PayPal is the only form of payment and expected within 3 days of the end-of-auction.
A non-paying bidder report will be filed with eBay on the 4th day!
Orders will only be shipped to a confirmed PayPal address
unless arrangements are made prior to purchase.
IF YOU USE A U.S. ADDRESS AND/OR FORWARDING SERVICE TO MAKE YOUR PURCHASE AND
THERE IS AN ISSUE
WITH YOUR ORDER YOU ARE RESPONSIBLE FOR THE COST OF RETURN
.
The eBay system will only provide a return label for the U.S. address.
We will not ship a replacement or provide a refund until the return is received!