Synergy100 to Blackmagic Atem Production Switcher Controller (Interface Adapter)

Description

Synergy 100 to Blackmagic Atem Switcher Controller (Interface Adapter)
This interface adapter turns Ross Synergy 100 control panel into full hardware control panel for controlling any Blackmagic Atem switcher.
Due to change of the broadcast format, many Ross Synergy 100 panels became obsolete. The Interface Adapter allows you to give a new life to these panels by converting them into hardware control panel for Atem at very low price. No modifications of Synegy 100 required. Just plug in the cables and it is ready for operation. The only optional modification can be done is to re-label the buttons for your own convenience. The transparent inserts with new labels for all buttons are included with the package.
Key features:
- Program/preset row crosspoint control (18 selectable inputs, all independently configurable)
- Key/Aux row crosspoint control (18 selectable inputs, all independently  configurable)
- T-Bar manual control of Mix, Wipe, Dip, DVE, Stinger
- Cut and Auto trans control (including adjustable Auto Trans rate)
- Separate control over 2 x  DSK, include DSK1 Tie,
DSK2 Tie,
DSK1 Cut
,
DSK2 Cut,
DSK1 Mix,
DSK2 Mix
buttons (including adjustable DSK Auto Trans rate)
- Separate control over 4 x  USK,
include USK1 -
USK4 Next,
USK1 -
USK4
ON AIR buttons (including adjustable USK Auto Trans rate)
- Full control over ME 1 or ME 2 transitions including 18 patterns, border/softness, etc
- Full control over ME 1 or ME 2 keyers LUMA, CHROMA, PATTERN and DVE
- Embeded Tally Interface (8 for Program and 8 for Preview bus)
and more
The following pictures illustrate connection process:
-
Picture 1 shows the interconnection diagram between the panel, adapter and Atem switcher.
-
Picture 2 shows connected panel, adapter and Atem switcher. Please note that in my panel shown on the photo some of the button’s LEDs color is different from the original.
-
Picture 3, 4 show Synergy 100 to Atem controller (interface adapter).
-
Picture 5 shows the Atem Software control. The buttons and settings that highlighted by green rectangle are fully controlled by Synergy 100 panel through Interface adapter.
The setting that highlighted by red rectangle are currently not controlled.
The following pictures illustrate change of settings:
-
Picture 6: Setting up IP Address for Atem. Picture shows
the fourth byte (
.240)
of the address 192.168.10.240
-
Picture 7: Setting up input source for button 7 (Mp2f - Media Player 2 Fill)
-
Picture 8: Setting up input source for button 7 + Shift (SSrc- SuperSource)
-
Picture 9: Setting up input source for AUX 1 (CLF1 - Clean Feed 1)
-
Picture 10: Selecting Still 6 for Media Player 1 (Mp 1 - Media Player 1)
-
Picture 11: Adjusting Position X with joystick (PosX - Position X)
-
Picture 12: Adjusting Border Softness with knob (bSft - Border Softness)
Parameter’s short name and value are displayed in real time. Lighted buttons and messages on indicators make the work with the panel easier.
What you receive:
1. 1(one) Synergy 100 to Atem controller (interface adapter)
2. 1(one) set of transparent inserts for buttons
3. USB cable for firmware update
4. Quick User Guide (download version only)
The following is not included in the package:
1.  Synergy 100 panel
2.  Power supply 9 volt 1 amp
3.  Atem switcher
4.  2 (two) Ethernet patch cord
Interface Adapter comes with the latest firmware (0.78 as of July 2018) and a 90 days parts and labor warranty.
Free consultation and free firmware update are included as well.
I tested all my panel's and adapter's with my Atem 1 M/E Production Studio 4K and Atem 2 M/E HD with Atem software version 7.3.
New features will be included into the future firmware releases as they become available.
I also developed an adapter for Echolab Overture 1 panel.
This is already available for sale.
I have already started selling it on pre-orders.
Soon I will finalize the development of the adapter for Echolab Overture 2 panel.
If you need this adapters, email me for details.
I ship worldwide, inquire quote via eBay messaging.
I ship via USPS Priority Mail to US and Standart Intrnational Mail with tracking and insurance to other country.
I securely pack all my shipments, whith using foamed polyethylene
So you get the your item in a completely safe package.
It is important for long way international delivery.
International buyers please note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. I will try our best to reduce the risk of the custom duties.
Please check with your country's customs office to determine what these additional costs will be prior to buying.