Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR Meter Capacitor/Low Ohm Up

Description

Fast Shipping
Great
Customer Support
Satisfaction Guaranteed
DESCRIPTION
Shipping
Shipping
Shipping
We offer FREE STANDARD SHIPPING!
FREE standard shipping to 48 States. For info on HI, AK or any locations outside the Continental United States please check shipping services and destinations in the shipping details of listing.
Note:
We do not ship to package/freight forwarding addresses. All orders purchased with such addresses will be cancelled and refunded.
We do not ship to PO Box addresses or addresses that have a PO Box in them. All orders purchased with such addresses will be cancelled and refunded.
Return
Return
Return
If an item arrives defective or becomes defective within 30 days of its arrival, you can return it for a replacement or a full refund. If a replacement is requested and we do not have the item in stock, we will give a full refund.
Holiday Shopping Return UPDATE:
For items ordered November 1st - December 31st 2020 we will accept returns until January 31st 2021.
Please contact us for a prepaid return shipping label.
Payment
Payment
Payment
We accept
PayPal
Feedback
Feedback
Feedback
If you have any issues with your order, please reach out to us! Our goal is total customer satisfaction.
Contact Us
Contact Us
Contact Us
Your total satisfaction is our goal! If you have any question or comments please reach out to us!
Just send us a message through eBay and we will get back to you within 24 hours (mon - fri) and usually much sooner!
Thank you for visiting our ebay store!
Using 100kHz to remove the impedance 1/(2*pi*F*C), the impedance will become small, and then we can measure the true series resistor value. A bad E-capacitor have larger ESR and create large ripple rather than filtering noise. Normally, a big capacitor is larger than 3 ohm.
Therefore, we can measure the capacitor is bad, damaged or in good condition by using this theory.
Because our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test. Because this low testing voltage, it cannot turn on the semiconductor inside a circuit under testing. During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.
Advantage of V2:
1) Change square wave to sine wave 100 KHz, reduce square wave's high frequency component, and affect the reading passing the test leads and capacitor.
2)Higher Resolution up to 0.001 ohm.
3)128X64 dot matrix LCD, with larger value display and information
4)Embedded 25V capacitor table at LCD, auto display the capacitor is good or bad reference to common 25V electrolytic capacitor.
5)New plastic case, curve design for hand carrying. New stand for 60 degree stand on desk.
6)Use 2X AA battery, more convenience and longer battery life than 9V battery.
7)Support external USB power, using standard micro-USB port.
Specification:
1)Accuracy: Up to 1% (detail on above table)
2) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range
3)Measuring voltage: <~40mV RMS (TESTING VOLTAGE)
4)Clamping voltage: ~0.15V (open voltage)
5)Battery 2X AA 1.5V battery (Not included)
6)External Power: 5V micro USB
7)Operating current0.02A
8)Battery Life time: >80 Hours
Package
1x MESR-100 V2
2 x test clips
- Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
- Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.
- Measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing.
- Auto-ranging capacitor ESR and Low Ohm Meter.
- Wide Measurement Range
Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR Meter Capacitor/Low Ohm Up
Click here to see description
Fast Shipping
Great
Customer Support
Satisfaction Guaranteed
DESCRIPTION
Shipping
All domestic packages are shipped for Free (Unless other shipping method was selected during the checkout)
We ship within two business days of payment, usually sooner
Standard FREE shipping takes between 3-5 business days
Expedited shipping takes between 2-3 business days
Overnight shipping takes between 1-2 business days
We do not accept P.O. BOXES - PLEASE PROVIDE A PHYSICAL ADDRESS
We Ship Globally using ebay's GSP, the item is sent to a logistic center in KY and shipped from there to the rest of the world.
International customers are responsible for all duties and taxes
Contact your local authority for questions related to the amount of duties or taxes you will be responsible for
Return
In the event that you would like to return your purchase, we allow returns that are processed within the defined return date (the return date is to be found in the return policy/shipping and handling section)
Please contact us for a return authorization and the return shipping address. Please contact us for a Return Merchandise Authorization (RMA) number. We advise you to use a reputable carrier service when returning your goods. Please pack all returns appropriately.
We ship globally Via eBay's global shipping program (GSP). Thus we don't cover returns for items shipped globally. Buyers returning such items will be refunded ONLY for the item's cost and not for the shipping.
please check the Voltage information and make sure it matches the one in your country. In case it's not stated in the description, do ask us.
Payment
PayPal is our preferred method of payments it's the quickest, easiest and most secure way to pay for your goods or services online. PayPal offers buyer and seller protection should there be a problem.
If you do not have a PayPal account, to get started and buy your first item with us is very easy. Simply click on the 'Buy It Now' button and follow the eBay checkout steps. Select PayPal as the payment method you then will be given the chance to enter your card details in to PayPal's secure checkout in order to pay for your order. Once the payment has been made, you will then be given the opportunity to make your own PayPal account to make paying for your items in the future very easy.
Should there be a problem with payment please do let us know.
Feedback
Customer satisfaction is very important to us. If you have any problem with your order,please contact us and we will do our best to make you satisfied, please do not leave a negative feedback before we resolve your problem.
We guarantee that your issue will be solved quickly.
As long as you are happy with your purchase of , please leave us a positive feedback.
Your feedback is very important to us it affects our search placement on eBay. We will leave a positive feedback for you in return automatically once we receive your feedback.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Thank you for visiting our ebay store!
Using 100kHz to remove the impedance 1/(2*pi*F*C), the impedance will become small, and then we can measure the true series resistor value. A bad E-capacitor have larger ESR and create large ripple rather than filtering noise. Normally, a big capacitor is larger than 3 ohm.
Therefore, we can measure the capacitor is bad, damaged or in good condition by using this theory.
Because our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test. Because this low testing voltage, it cannot turn on the semiconductor inside a circuit under testing. During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.
Advantage of V2:
1) Change square wave to sine wave 100 KHz, reduce square wave's high frequency component, and affect the reading passing the test leads and capacitor.
2)Higher Resolution up to 0.001 ohm.
3)128X64 dot matrix LCD, with larger value display and information
4)Embedded 25V capacitor table at LCD, auto display the capacitor is good or bad reference to common 25V electrolytic capacitor.
5)New plastic case, curve design for hand carrying. New stand for 60 degree stand on desk.
6)Use 2X AA battery, more convenience and longer battery life than 9V battery.
7)Support external USB power, using standard micro-USB port.
Specification:
1)Accuracy: Up to 1% (detail on above table)
2) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range
3)Measuring voltage: <~40mV RMS (TESTING VOLTAGE)
4)Clamping voltage: ~0.15V (open voltage)
5)Battery 2X AA 1.5V battery (Not included)
6)External Power: 5V micro USB
7)Operating current0.02A
8)Battery Life time: >80 Hours
Package
1x MESR-100 V2
2 x test clips
- Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
- Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.
- Measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing.
- Auto-ranging capacitor ESR and Low Ohm Meter.
- Wide Measurement Range
Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR Meter Capacitor/Low Ohm Up