Capacitor Wizard Analog ESR Tester

Description

The Capacitor Wizard® meter. This product is a very useful capacitor quality analyzer for capacitors >1uF. It uses the ESR (equivalent series resistance) method for determining a capacitors' health. The ESR method detects problems with a device due to changes in the dielectric constant or the electrolytic compound drying out. This is an indispensable piece of test equipment for a system designer or product technician!
Specifications :
Meter Range: 0 to 30 Ohms Expanded Scale
Output Test Signal: 100kHz Sine Wave
Output Voltage: Only 5 mV RMS! -
will NOT turn on solid state devices
Meter input resistance: 2.5 Ohm - Resolution as low as 0.1 Ohm
Adjustable "Capacitor Good" beeper-Beeper Resolution as low as 50 milli Ohm!
Power: 4 AA Alkaline batteries(not included)
Size 7" x 4" x 1.5"
High quality gold plated probe tips with 4 foot leads
Ohms-Zero and Beeper-Adjust controls
UL and ULC (UL3111-1 )
CE European Standard EN-55022 and EN-50082-1
Capacitance range - caps below 1uF start to lose resolution, but it is still useful in repair work. There is no limit for large caps. with the cap wizard
The Mystery of Capacitor ESR Exposed
Capacitor Wizard® Operating Manual
ESR: Methods of Measurement
First Time User Guide
Capacitor Wizard "Step by Step" Repair Guide
CapSVR Installation Instructions
ESR Measurement Using Square Wave
Capacitance Measurement Using Square Wave
Basic RC Time Constants